Flush mount floor registers

Flush mount floor registers

floor registers, wood floor registers, air registers, wood registers

A flush mount floor register sits flush with 3/4” hardwood floor. It is designed to lay flat with the surface of the wood flooring, provides two way diffusion and is the preferred style for sand and finish hardwood floors where an architecturally smooth look is desired. Each frame is grooved on the outside to accommodate most 3/4” tongue and groove flooring. It is recommended that this floor register be installed during the installation of your hardwood floor, while the use in traffic area is not recommended.

Specifications 2×10″, 2×12″, 2×14″, 3×10″, 4×10″, 4×12″, 4×14″, 6×10″, 6×12″, 6×14″

Measure the opening in your floor, wall or ceiling. The width and length of your opening should match the duct opening sizes. For example, if the opening size is 4″x10″, then you should order a 4×10 floor register.
Custom sizes are available upon request.

Species Click the following species to know more product information.

santos-mahogany floor register
Santos mahogany floor register

 

Finishes

Finely sanded, Unfinished

Dampers

Metal dampers are available for any size of floor registers. They are easy handling and fuctional. Please see the below instruction for the sliding metal damper. Click here to see how this sliding metal damper works.

metal damper

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: